MDTopX button

User interface

The MDTopX user interface has been substantially redesigned. The MDTopX button replaces File and is located in the interface's upper left corner.

Clicking the MDTopX button MDTopX button displays the same basic file opening, saving and printing commands available in earlier MDTop versions.

  • New: creates a file.
  • Open...: opens an existing document.
  • Import...: imports data from other digital model types.
  • Save: saves the current document. Enabled only if the document has changed. An existing document is saved in the same format. For a new document, Windows file selection lets you choose its location and format. To save in a different format, use Save as, explained below. Available formats depend on the document type:
    • Digital model files can be saved only as MDT.
    • Drawing files can be saved as BIN, DXF, DXF for AutoCad 2000 or later, or DGN.
    • Image files can be saved as TIFF, BMP or JPEG.
  • Save as...: saves the current document with a different name or destination folder. Windows file selection opens to specify both.
  • Export...: exports the current document's data. Available only for digital model or roads documents.
    • Digital model data can be stored in another digital model structure. Export is also available from the command line. Supported export formats are:
      • DIGI files: mapping files for DIGI.
      • DXF files: mapping files for AutoCad.
      • DXF 2000 files: mapping files for AutoCad 2000 or later.
      • DGN files: mapping files for MicroStation 7 or earlier.
      • DEM files for VirtuaLand: grid digital terrain models for VirtuaLand.
      • ASCII files: grid digital terrain models stored as ASCII point lists.
      • USGS GTOPO30 files: grid digital terrain models in the USGS (United States Geological Survey) format.
      • SGE files: grid digital terrain models for the Servicio Geográfico del Ejército.
      • ArcInfo grid files: grid digital terrain models for ArcInfo.
      • ArcView files: grid digital terrain models for ArcView.
      • MTN 25 files: grid digital terrain models in the Instituto Geográfico Nacional format.
      • LH Socet Set files: grid digital terrain models for the Socet Set photogrammetric program.
      • Binary Stereolithography files: STLB files for modeling three-dimensional objects.
      • ASCII Stereolithography files: STLA files for modeling three-dimensional objects.
    • For a roads document, if the horizontal alignment view was active when the command was run, a dialog selects the horizontal and vertical alignments to export. Supported formats are:
      • DIGI files: mapping files for DIGI.
      • DXF files: mapping files for AutoCad.
      • DXF 2000 files: mapping files for AutoCad 2000 or later.
      • DGN files: mapping files for MicroStation.
  • Print...: prints the current document.
  • Preview: displays how the current document will print.
  • Print setup...: configures the print output device.
  • Recent file: lists up to 10 recently used documents for quick reopening.
  • Close: closes the current document. If it has unsaved changes, the program asks about them.

A button also opens the application's general Options.