Commands by function
This page groups drawing window commands by function, following drawing window menus. Commands without a menu option appear in the group corresponding to their purpose.
The complete alphabetical list is in Drawing window commands.
Files
Opening, importing, and exporting
CAPTURE_DRAWING_WINDOW: Create a .PNG file containing the drawing window contents. LOAD_P: Read an ASCII coordinate file and add one point to the working file for each coordinate set (X Y Z) read. LOAD_T: Read coordinates and texts from an ASCII file and insert each text into the working file at the specified coordinates. EXPORT: Export the current file to other formats (BIN, DGN, DWG, GeoMedia, and others). EXPORT_SELECTED_ENTITIES: Export selected entities to a drawing file. EXPORTA_VIRTUAL: Export only virtual entities to a new file. DRAWING_FILE: Select the working drawing file from reference files loaded with LOAD_F. END: End the work session for the current file. IMPORT: Import other formats (BIN, DGN, DWG, GeoMedia, and others) into the drawing file. IMPORT_JOINING_POLYGONS: Import one or more files into the drawing file and merge imported polygons that adjoin polygons in the drawing file and have the same codes and database attributes. NEW_PROJECT: Display the dialog box to open a photogrammetric model or drawing file. IMPORTATION_PARAMETERS: Specify the parameters sent to the corresponding importer or exporter so that the configuration dialog box does not appear when importing or exporting a file of that type. EXIT: Save the active drawing file and close Digi3D.AI.
Reference files
CHANGE_FILES: Swap the active drawing file with the reference drawing file. LOAD_F: Display one or more reference drawing files alongside the current drawing file. LEAVE: Unload reference files attached to the working file. RECARGAR_ARCHIVOS_REFERENCIA_VISTA: Reload reference files supporting an area of interest with entities overlapping the current view.
File tools
ASSIGN_DRAWING_FILE_TAGS: Assign tags to a drawing file in the Drawing file pane. BAK: Create a backup copy of the active drawing file. BININFO: Display information about entities in loaded drawing files. COMPRESS: Remove all entities marked as deleted from the drawing file and update loaded topologies in memory. P_FILE: Set or change the point file used by DigiNG without leaving the work session and returning to the application start screen. SAVE_CODE_TABLE: Save the active code table to a file. PRODUCTION: Generate a file containing production information for the currently open drawing file.
Editing
Undo, search, and entities of interest
CLEAR_ENTITIES_OF_INTEREST: Clear the entities of interest setting to enable all loaded entities for all processes. SEARCH: Specify entity search criteria. ENTITIES_OF_INTEREST: Specify entities of interest for commands that modify entities. REDO: Redo the last operation undone with UNDO. UNDO: Undo the most recent actions performed by the application.
Deleting, trimming, and recovering entities
DELETE_COD: Delete all entities whose code matches the specified code. DELETE_COD_W: Delete entities matching the entered code and related to a window by containment, overlap, or intersection. DELETE_E: Delete the specified graphical entities and texts from the drawing. DELETE_LIN1: Delete lines recorded with one point and entities whose vertices all coincide. DELETE_LAST: Delete the last entity recorded in the drawing file. DELETE_W: Delete graphic entities inside the boundary of a previously defined entity. CUT_F: Generate a new file with entities inside the boundary of a selected drawing entity. CUT_F_CENTROID: Generate a new file with the elements inside the boundary of a drawing entity with a specific centroid. CLEAN: Split entities crossing text or boundary line outlines, then delete or recode interior portions. RECOVER: Recover entities marked as deleted in the drawing file if DELETED is enabled. RECOVER_COD: Recover all deleted entities with a code matching the one entered.
Entity codes and attributes
UPDATE_ATTRIBUTES: Update the selected entity's attributes with those active in the Active attributes pane. ADD_CODES: Add the active code list to a selected entity. CHNG_ATTRIBUTES: Replace the selected entity's attributes with those active in the Active attributes pane. CHNG_COD: Change the code assigned to a graphic entity. EDIT_ATTRIBUTES: Edit the attributes of the selected entity. EDIT_CODES: Edit the codes of the selected entity. DELETE_UNKNOWN_CODES: Remove all unknown codes from the drawing file. PREFIJA_COD: Prepend a prefix to codes of each entity selected with a data point, except codes already prefixed. RENAME_UNKNOWN_CODES: Rename unknown codes found in the drawing file. RENAMCOD: Change the code of a set of entities to the active code or a code specified in the command call. RENOMCOD_MANTENIENDO_ATRIBUTOS: Replace a code on all entities bearing it while retaining the replaced code's database table and record. RENAMCOD_SEL: Replace the code of selected entities with another code. SEPARATE_MULTICOD: Explode entities with multiple codes into multiple entities with a single code. REPLACE_COD: Replace codes of the selected entity with the active codes.
Coordinates: moving, copying, and duplicating
CHNG_Z: Replace a drawing element's elevation with a new value. CHNG_ACTIVE_Z: Change the Z of one or more elements to the currently active Z. COPY_R: Copy a drawing entity and rotate it with a second input point. COPYP: Copy a drawing entity with translation, scaling, and rotation. COPY: Create a copy of a drawing entity. DISPLACE: Move drawing file entities by the specified X, Y, and Z distances. DUP: Create a copy of an entity in place. DUPLICATE: Duplicate an entity while retaining its code. EDITOR: Edit the coordinates of the selected entity. MERGE_Z: Assign a digitized point's Z to the nearest vertex of each nearby line. MOVE: Change the position of one or more entities in X, Y, and Z. MOVE_Z: Change the elevation of one or more entities. ROUND_COORDINATE: Replace selected line and polygon vertex X or Y coordinates with a given value when they differ from it by no more than a tolerance. REWRITE: Rewrite selected entities. ZFIXED: Assign all vertices of each selected entity the same Z coordinate, a multiple of the contour interval.
Polylines
FILLET: Draw a circular fillet between two segments of an entity sharing a vertex. ADJUST_AREA: Move the selected segment to adjust the area of the selected closed line to the target area. ALIGN: Move vertices whose distance to the digitized virtual line is no greater than the primary active distance. DELETE_VERTEX: Delete a vertex from a linear entity. CHNG_MAXPOINTS: Split linear entities exceeding the specified vertex count into sections with fewer vertices. CHNG_DIREC: Reverse the order of recorded points after digitizing a drawing element. CHNG_DOWN_DIR: Reverse a line to run from its highest endpoint to its lowest. CHNG_UP_DIR: Reverse a line to run from its lowest endpoint to its highest. CLOSE: Close an existing entity in the drawing file. CUT_2P: Split an entity at two points on it. CUT_E: Split an element into two elements. CUT_AND_DELETE: Split an element into two elements, then delete one of them. CONTOUR_HEIGHTS: Assign elevations to contour lines globally. INTERSECTION: Draw the intersection of an entity with two others, removing the portion of the first between its intersections with the other two. DISPLACE_ORIGIN: Change the origin (start and end) of a closed line. EDIT: Modify the plan (X, Y) position of element vertices. EDIT_XYZ: Modify the three-dimensional (X, Y, Z) position of element vertices. EDIT_Z: Modify the Z coordinate of the selected entity. EXTEND_TRIM_BY_TOLERANCE: Extend or trim endpoints of visible lines to meet other lines. SPR: Extend or trim an entity to its intersection with another given entity. SPR_M: Extend or trim a group of entities until they intersect another specified entity. SPR_D: Extend or trim an entity to intersect another, splitting both at the intersection to create a node. SPR_PLANE: Extend the line endpoint nearest the selection to a selected plane. SPR_XYZ: Extend or trim an entity to a boundary, setting the adjusted endpoint's Z to the boundary Z. SPR2X: Extend two entities to their intersection. EXTEND_END: Dynamically extend a polyline endpoint. GEN: Generalize lines, polygons, and complex entities: remove unnecessary vertices by measuring distances in 3D space (X, Y, and Z). GEN_2D: Generalize lines and polygons using distances in the XY plane, ignoring vertex Z. INSERT_VERTEX: Insert a vertex into a line or polygon. INTERPOLATE_Z_BETWEEN_VERTICES: Interpolate vertex Z coordinates between two selected vertices of a line. JOIN: Move all points within an area determined by cursor size to a single point. MOD: Modify the geometry of an entity in XY. MOD_MULTIPLE: Modify the geometry of multiple entities in XY. MOD_Z: Modify an entity's geometry in XYZ. MOD_Z_MULTIPLE: Modify the geometry of multiple entities in XYZ. MODIFYVERTEX: Change the position of a vertex in a line or polygon. STB: Set back a segment of an entity. SMOOTH: Smooth the geometric shape of an existing linear element in the drawing. SMOOTH_SPLINE: Smooth a line by creating a cubic spline. TOL: Set the tolerance factor for generalization. TOL_ANG: Set the angular tolerance factor for generalization. TRIM: Trim an entity to its intersection with another entity's boundary. TRIM_SIDE: Trim multiple entities by first selecting the boundary line and then digitizing a point on one side. TRIM_M: Trim multiple entities by first selecting the boundary line and then digitizing a virtual boundary. CONNECT: Join two selected linear entities into a single drawing entity. CONNECT_COD: Join polylines sharing a code and crossed by a selection line.
Points
CHNG_ACT_SCALE: Assign the active scale to one or more points in the drawing. EXPLODE_POINTS: Convert each point's symbol in the active drawing file into independent lines with the point's codes, and delete the point. ROTATE_POINT: Rotate a point symbol already inserted in the drawing file.
Text
DELETE_TEXT: Delete all text matching any parameter (supports wildcards). CHNG_AA: Assign the active angle to the rotation of one or more texts or points in the drawing. CHNG_TH: Change the height of one or more texts in the drawing. CHNG_CHARACTER: Replace a specified text character with another. CHNG_JT: Change the justification of one or more existing texts in the drawing. CHNG_JT2: Change the justification of one or more existing texts in the drawing without changing their position. CHNG_TEXT: Replace all matching text with the specified text. EDIT_TEXT: Edit a text entity in the drawing file. R_TEXTO: Rotate existing text in the drawing file. REPLACE_TEXT: Replace text with other text.
Polygons
DELETE_HOLE: Delete a hole from a polygon. CUT_POLYGON: Split a polygon into polygons according to its intersections with a cutting line. EXPLODE_POLYGON: Split a polygon into all its component entities. EXPLODE_POLYGONS_COD: Split multiple polygons into all their component entities. INSERT_HOLE: Insert a hole in a polygon or a closed line. TRIM_POLYGON: Trim a polygon by removing the portion intersecting a boundary. TRIM_POLYGONS: Trim all polygons intersecting a boundary.
Complex entities
EXPLOIT_COMPLEX: Explode complex entities into their component line strings. EXPLOIT_COMPLEXES_COD: Explode complex entities into their component line strings. EXPLOIT_COMPLEXES_COD2: Split multiple complex entities by code, without retaining subentity codes. TRANSFORMA_COMPLEJO_A_PUNTO: Replace complex entities bearing specified codes with points at their bounding box centers.
Advanced
BINPLT: Explode symbology using the scale configured on the Drawing file tab. DIVIDE: Insert text or symbols along a linear entity. ORDER_BY_CODE: Sort the entities in a file by code, grouping them in the file by the code they belong to. ARRANGE_BY_N_CODE: Sort the entities in a file by numeric code, grouping them in the file by the numeric code they belong to. ORDER_BY_DIGI_TAB: Reorder the entities in a file according to their order in the active code table. TAG_DESCRIPTION: Label point entities with the description of the point code. TRANSFORM: Perform transformations in the drawing file.
Displaying codes and entities
ASSIGN_REPRESENTATIONS: Assign a representation file to modify how geometries are displayed. UNKNOWN_COLOR: Set the drawing color for entities whose code is unknown. OFF: Disable the display of one or more codes. OFF_FILE: Disable codes in the drawing window for a specific file index. OFF_PYTHON_EXPRESSION: Hide geometries returning true for the Python expression supplied as a parameter. OFF_TYPE: Disable codes in the orthogonal view. OFF_ALL: Hide all geometries. OFFD: Disable codes (one or more) in the drawing view, both in DigiNG and in stereo view. OFFD_TYPE: Disable codes in the photogrammetric and drawing views. OFFS: Disable codes in stereo view. OFFS_FILE: Disable codes in the photogrammetric window for a specific file index. OFFS_TYPE: Disable codes in the photogrammetric view. ON: Enable the display of one or more codes in the drawing window. ON_FILE: Enable codes in the drawing window for a specific file index. ON_PYTHON_EXPRESSION: Show geometries returning true for the Python expression supplied as a parameter. ON_ONLY_PYTHON_EXPRESSION: Show only geometries returning true for the Python expression supplied as a parameter. ON_TYPE: Enable codes in the orthogonal view. OND: Enable codes (one or more) in the drawing, both in stereo view and in Digi.NG. OND_TYPE: Enable codes in the photogrammetric and drawing views. ONS: Enable codes in stereo view. ONS_FILE: Enable codes in the photogrammetric window for a specific file index. ONS_TYPE: Enable codes in the photogrammetric view. ONONLY: Enable only the specified codes in the drawing and photogrammetric windows. SPATTERN: Show or hide line patterns in stereo view. DYNAMIC_REPRESENTATION: Assign the dynamic representation supplied as a parameter. SEE_ACTIVE_CODES_ONLY: Enable only the active codes and disable all others in both the drawing and stereoscopic views. SEE_ONLY_CODES_SELECTED_ENTITY: Leave only the selected entity's codes enabled on screen, disabling all others. SEE_ONLY_WITH_BBDD_LINK: Show only entities with at least one database link. SEE_ONLY_ENTITIES_WITH_BBDD_LINK: Show only entities in which every code has a database link. SEE_ONLY_SELECTED_ENTITIES: Hide all entities except those selected. SEE_ONLY_ENTITIES_WITHOUT_BBDD_LINK: Show only entities with no codes linked to a database. SEE_ONLY_TAGS_ACTIVE_CODES: Enable only codes that share at least one tag with the active codes. SEE_ONLY_TAGS_SELECTED_ENTITY: Enable only codes sharing a tag with the selected entity's codes. SEE_ONLY_WITHOUT_BBDD_LINK: Show only entities with at least one code without a database link. SEE_ALL_ENTITIES: Enable the display of all entities.
Zooms and view
OPEN_BING_MAPS: Open a Bing Maps window at the drawing window cursor coordinates. OPEN_GOOGLE_MAPS: Specify a point and open a Google Maps window centered on its coordinates. OPEN_GOOGLE_STREET_VIEW: Specify a point and open a Google Street View window at its coordinates. OPEN_OPEN_STREET_MAP: Specify a point and open an Open Street Map window at its coordinates. OPEN_SIGPAC: Specify a point and open the SIGPAC viewer at its coordinates. PERSPECTIVE_CAMERA: Set the drawing window camera to a perspective camera. ORTHOGRAPHIC_CAMERA: Set the drawing window camera to an orthographic camera. ENTER_SPHERE: Enter a sphere by selecting a point on the screen. SCALE: Report the current drawing file display scale. PREVIOUS_SPHERE: Enter the previous sphere. NEXT_SPHERE: Enter the next sphere. ROTATE: Rotate the viewing window. GO_TO: Move the Digi3D stereoplotter mark to the cursor position or a specified point. MOVE_CAMERA_FPS: Move the perspective camera like a first-person game. PERSPECTIVE_CAMERA_PARAMETERS: Set perspective camera parameters. VIEWPOINT: Set the orthographic window viewpoint to one of the predefined views. DYNAMIC_VIEWPOINT: Rotate the orthographic window viewpoint dynamically using a rotation sphere. REGENERATE: Refresh the screen to update the drawing file display. ROTATE_CAMERA_FPS: Rotate the drawing window camera with mouse movements. PREVIOUS_ZOOM: Restore the drawing window view from before the last view change. ZOOM_ENTITY: Zoom to the selected entity. ZOOM-: Decrease the zoom factor. ZOOM+: Increase the zoom factor. 2PZOOM: Pan the DigiNG view with the mouse. ZOOMTO: Center the view on the current cursor position. RGHZOOM: Move the drawing view right. ZOOME: Zoom to drawing extents. ZOOME_E: Zoom to the extents of an enclosure by calculating topologies in real time. ZOOMIN: Increase the zoom factor. LOWERZOOM: Move the drawing view down. LFTZOOM: Move the drawing view left. ZOOMOUT: Decrease the zoom factor. ZOOMP: Center the drawing view on a point you choose. ZOOMUP: Move the drawing view up. ZOOMW: Display the part of the drawing enclosed by a window you define.
Immediate
Active codes
CLONE: Clone properties (codes, active angle, text height, etc.) from the selected entity. CLONE_ATTRIBUTES: Clone the attributes of the selected entity. CLONE_BBDD_FIELDS: Clone database fields from the selected entity. CLONAR_CÓDIGOS: Replace the active code list with the codes of a selected entity. CLONAR_CÓDIGOS+: Add the codes of a selected entity to the active code list. COD: Set the code used to draw entities. COD_HEIGHTS: Specify a code for digitizing spot elevations. CONTOUR_COD: Define index and intermediate contour codes. COD_WITHOUT_COMMAND: Replace the active code list, like COD. COD+: Add one or more codes to the active code list.
Z coordinate
MOVE DOWN_Z: Lower cursor Z by the configured contour interval. MOVESUP_Z: Raise Z by the configured contour interval.
Snaps and search modes
AUTOSMODE: Enable or disable automatic search mode. EXHAUSTIVE_AUTOSMODE: Enable or disable exhaustive search mode. CHNG_SMODE: Set the search mode for snapping graphically to drawing elements. CONFIGURE_SHOW_CONTOUR_PASS: Configure tolerance and codes used to display contour crossings (SHOW_CONTOUR_PASS variable). AUTO_SMODE_PARAMETERS: Load the XML file containing automatic search mode settings.
Measuring and inspecting entities
LIST: Show information about the selected entity. LIST_ATTRIBUTES: Display the selected entity's attributes in the Results pane. LIST_WKT: List the selected geometry in WKT format. MEASURE: Calculate and display the distance between two points. MEASURE_LINE_PERIMETER: Measure the perimeter of the selected line (in plan view). MEASURE_LINE_XYZ_PERIMETER: Measure the perimeter of the selected line (in 3D space, including Z). MEASURE_PERP: Measure the perpendicular to a selected segment. MEASURE_SEGMENT: Measure the selected segment of the selected line (in plan view). MEASURE_SEGMENT_XYZ: Measure the selected segment of the selected line (in 3D space, including Z). MEASURE+: Calculate horizontal perimeter, spatial perimeter, and area of the polyline defined by a set of vertices.
Selection
DESELECT_ALL: Deselect all selected entities. SELECT_COD: Select all entities having any selected code among their codes. SELECT_INSIDE_POLYGON: Digitize a new polygon and select all entities entirely inside it. SELECT_INSIDE_WINDOW: Digitize a new window and select all entities entirely inside it. SELECT_PYTHON_EXPRESSION: Send geometries matching a Python expression supplied as a parameter or entered in the dialog to the active command. SELECT_OUTSIDE_POLYGON: Digitize a new polygon and select all entities entirely outside it. SELECT_OUTSIDE_WINDOW: Digitize a new window and select all entities entirely outside it. SELECT_INDEX: Select an entity by its recording index. SELECT_FLOOD: Send entities forming the selected enclosure's boundary to the active command. SELECT_LINE: Select lines crossing a virtual line you draw. SELECT_MULTIPLE: Select and deselect multiple entities. SELECT_POLYGON: Digitize a new polygon and select all entities overlapping it. SELECT_ALL: Select every drawing file entity when running commands supporting multiple selection. SELECT_EVERYTHING_CURSOR: Select all entities intersecting the cursor with one click. SELECT_LAST: Select the last entity recorded in the drawing file when a running command requests entity selection. SELECT_WINDOW: Digitize a new window and select all entities overlapping it.
Virtual keyboards and command execution
CANCEL_COMMANDS: Stop the current command and any commands it interrupted. CANCEL_REPEAT_ACTIVE_COMMAND: Prevent a repeatable running command from repeating when REPEAT is enabled. CHANGE_KEYS_MNU: Change the key file. ESCAPE: End a command. MACRO_INSTRUCTIONS: Run macroinstructions, also called at-sign macros. KEY: Assign Digi3D.AI commands to keystrokes in the active virtual keyboard.
Other immediate commands
ADD: Add point coordinates to the point file defined on the DigiNG startup screen or set with P_FILE. COPY_COORDINATES: Copy the coordinates of a digitized point to the clipboard. CURSOR: Set the cursor size. XY: Enter coordinates of one or more points.
Drawing
Polylines
CLOSE_ENT: Close the line being drawn and finish it. CONTINUE_LINE: Continue a selected line. FIN_ENT: Finish defining the geometry of an entity. LINE: Draw a line in the current file. PERP: Draw lines perpendicular to a drawing entity. PERP_Z: Draw lines perpendicular to a drawing entity. NEXT_VERTICAL_SEGMENT_DOWNWARDS: Configure the active command so the next segment is vertical and has two points. NEXT_VERTICAL_SEGMENT_UPWARDS: Configure the active command so the next segment is vertical and has two points. TYPE_OF_Z: Specify how the program records Z coordinates for vertices of linear entities. L: Delete the last vertex of the entity being recorded when you run the command. U2: Delete the last drawn segment of a linear entity without moving the cursor. MU: Delete the most recent points of the entity being recorded when you run the command. XYLINE: Add vertices to the line being digitized. XYZLINE: Add vertices to the line you are digitizing.
Arcs, splines, and circles
ARC: Draw an arc in space from three specified points. TANGENT_ARC: Draw an arc tangent to the previous segment. CIR2P: Draw a circle using its center and a point on it. CIR3D: Draw the circle through three given points in the plane they define. CIR3P: Draw a circle using three given points. CIRCR: Draw a circle by defining its center and entering its radius numerically. MULTIARC: Draw consecutive, connected arcs. SPLINE: Draw a figure with arcs, converting them into a flowing curve.
Parallels
PARALLEL: Draw lines parallel to one or more entities at a specified distance. PARALLEL_AD: Draw a parallel with parameters from the Active distance variable. DYNAMIC_PARALLEL: Draw a line parallel to an entity at the specified distance, updating its display as the cursor moves. DYNAMIC_PARALLEL_WITH_AXIS: Draw a dynamic parallel with active codes and an axis between it and the original line, using axis codes supplied as parameters. DYNAMIC_PARALLEL_WITH_AXIS_Z: Draw a dynamic parallel with active codes and an axis between it and the original line, using axis codes supplied as parameters. DYNAMIC_PARALLEL_WITH_AXIS_ACTIVE_Z: Draw a dynamic parallel with active codes and an axis between it and the original line, using axis codes supplied as parameters. DYNAMIC_PARALLEL_DRAWING_PLANE: Draw a dynamic parallel in the drawing window plane. DYNAMIC_PARALLEL_XYZ: Draw a line parallel to an entity at the specified distance, using the photogrammetric window Z. DYNAMIC_PARALLEL_FIXED_Z: Draw a line parallel to an entity at the specified distance and Z. PARALLEL_Z: Draw a parallel to an existing line, assigning the digitized point's Z to every generated vertex.
Shapes, markings, and fills
2P: Draw a square from two points. 2P_AA: Draw a rotated rectangle. 3P: Draw a rectangular shape. ZEBRA: Draw crosswalks. ZEBRA_4P: Draw pedestrian crossings by specifying only the number of white stripes and four points defining shape and position. SQUARES: Draw segments both parallel and perpendicular to the base. SQUARES_4P: Draw steps or matrices of four-sided polygons. AXIS_TO_POLYGON: Draw a polygon surrounding an existing line. LADDER: Draw stairs in 3D space. LADDER_AD: Draw stairs in 3D space, specifying the step width. HORIZON: Draw horizontal road markings by inserting symbols (made of horizontal and vertical segments) and gaps. PERP_TO: Draw segments perpendicular to a given entity. POINT_WEAVE: Fill the interior of a closed area entity with a dot pattern. SCRATCH: Hatch the interior of a closed area entity with parallel lines. RECTANGLE_2P_NORTH: Draw a north-oriented rectangle defined by two diagonally opposite points. RECTANGLE_DR: Digitize a rectangle with the specified dimensions and rotate it as needed. SIMB: Fill the interior of a closed area entity with a symbol pattern. WEAVE: Crosshatch the interior of a closed area entity.
Points
POINT: Draw a point in the current file. POINT_2P: Draw a point in the current file with its scale and rotation calculated from the second digitized point. R_POINT: Insert a point symbol with a specified rotation. EXTRACT_P: Place a point beside each text in the drawing file bearing any specified code.
Polygons and centroids
CREATE_POLYGON: Create a polygon with holes from existing closed lines. EXTRACT_CENTROID: Draw the centroid of a selected polygon or line. EXTRACT_CENTROIDS_COD: Generate a centroid inside polygons or closed lines having any selected code. FORM_POLYGONS: Create or modify polygons by flooding and removing shared segments. POL: Draw a polygon.
Text and labels
1TEXT: Insert parameter text (or text entered in the message bar) once, regardless of REPEAT. HEIGHT: Digitize a spot elevation. DIBUJA_TEXTO_EXTRAIDO_CALLEJERO_CATASTRO: Insert text at the clicked point containing the street and property number returned by the Spanish Cadastre coordinate query service. DIBUJA_TEXTO_EXTRAIDO_SERVICIO_MAPAS_AZURE: Insert rotated text containing the street name returned by Azure Maps reverse geocoding for the clicked point. TAG_CONTOURS: Label one or more contours at once with their elevations. TAG_CADASTRAL_REFERENCE: Query the Spanish Cadastre web service for the cadastral reference at the insertion coordinates and insert text with that reference. TAG_Z: Label one or more points with their Z coordinates. TEXT: Insert text in the drawing file. EDITABLE_TEXT: Like TEXT, but parameters do not hide the editing control. TEXT_R: Insert text in the drawing in the direction you specify. EDITABLE_TEXT_R: Like TEXT_R, but parameters do not hide the editing control.
Dimensioning
AUTOMATIC_HEIGHT_LABEL: If the active sensor supports it, project a line downward and upward and dimension its intersection with the model. AREA: Calculate the area of closed graphic entities and place text with the value at the specified position. DRAW_HEIGHT: Insert text with the height difference (Z coordinate increment) between two digitized points. DRAW_DISTANCE: Insert text with the plan distance (in two dimensions, 2D) between two digitized points. DRAW_DISTANCE_3D: Insert text showing spatial distance (in three dimensions, 3D) between two digitized points, including their elevation difference. DRAW_PERIMETER: Calculate the perimeter (length) of a selected drawing entity and place text with this value at the specified position. DRAW_PERIMETER_3D: Calculate the selected graphic entity 3D perimeter (spatial length including elevation changes) and place text with the value at the specified position. PUT_HEIGHT: Place text with the height difference between two recorded points. PUT_DISTANCE: Place text with the distance between two points. PUT_XY: Place two numeric text entities with the X,Y coordinates of the selected point.
Interpolation
DENSIFICA: Insert vertices into lines and polygons with the specified codes so no segment exceeds a distance. INTER: Interpolate contours. INTER_AXIS: Interpolate an entity between two selected entities. INTERPOLATE_COD: Interpolate contours using four points, with entities of a specified code as guide lines.
Complex entities and blocks
BLOCK: Store an entity or set of entities in a new file for later insertion into any drawing. BLOCK_2P: Store an entity or set of entities in a new file for later insertion into any drawing. CREATE_COMPLEX: Create complex elements from multiple entities. CREATE_COMPLEXES_COD: Create complex elements by grouping entities with the same code. INS: Insert a drawing file into the working file. INS_3D: Insert a 3D block using three points: the first sets its position, the second its orientation, and the third its rotation. INS_AA: Insert a drawing file into the working file, rotated by the active angle. INS_COMPLEX: Insert the contents of a drawing file as a single point-based complex element. INSR: Insert a block stored in a drawing file at a specified position in the current working file.
Sheet index
SHEET: Create a drawing file with a sheet frame at a specified scale, regularly spaced grid marks, and coordinate labels. TRIM_TRACE: Create a series of sheets in the same way as SHEET. TRACE: Create a sheet index along a trace with centroids, for subsequent sheet creation with TRIM_TRACE.
Images
INS_PHOTO: Insert an image with two points: the first sets its center; the second sets rotation and scale. INS_PHOTO_2P_AA: Insert an image with two points and the active angle. INS_PHOTO_3P: Insert an image into the drawing file using three points.
DTM
CREAR_TRAMOS_PARA_UNIR_CURVAS: Create two-vertex lines joining nearby, unconnected contour line endpoints at the same elevation. CREATE_DEM: Generate a new triangulation from existing mapping inside the selected boundary, project a regular grid of points onto it, and save the results to a LAS file, a GeoTIFF file, or both. CURVE: Generate contours from a triangulation. ELIMINA_CURVAS_POR_EQUIDISTANCIA: Delete contour lines with the specified codes whose Z coordinate is a multiple of the contour interval. FILTRAR: Delete contours not matching an interval and assign index or intermediate contour codes to the rest according to Z. DTM_MOVES_DIGI3D: Set whether loaded digital terrain models change the Digi3D Z coordinate. MOVE_Z_W: Change the elevation of entities inside a closed entity. PROJECT: Project selected geometries onto loaded digital terrain models. PROJECT_COD: Project entities onto the digital terrain model (DTM) loaded when the command runs. PROJECT_COD_TAG: Project all entities with a specified code onto loaded DTMs bearing the specified tag. PROJECT_BY_CONDITION: Project vertices of entities bearing a specified code onto loaded DTMs if their Z difference satisfies a condition. PROJECT_TOPOLOGY_POINTS: Project entities forming a topology's enclosures onto loaded DTMs. REDONDEA_Z: Round every vertex Z coordinate of contours bearing the specified codes to an integer. TRIANGULATE: Calculate a digital terrain model (DTM) triangulation from geometries in the drawing window. TRIANGULATE_LINES_EXCEPT_POINTS_WITH_CODE: Calculate a triangulation excluding nodes reached by lines with specified codes. TRIANGULATE_TOPOLOGY_POINTS_EXCEPT: Calculate a triangulation from a topology's lines, excluding lines bearing specified codes.
Orthophoto and raster
MERGE_RASTER: Generate a TIFF file showing, with their symbology, the entities from visible drawing files that fall within a rectangular boundary line. CAL_ORTHO: Compute orthophotographs.
Geometric analysis
GROUP_TOGETHER_DUPLICATE_ENTITIES: Group all duplicate entities into a single entity per code. GROUPS_TOGETHER_DUPLICATE_VISIBLE_ENTITIES: Group all visible duplicate entities into a single entity. ADJUST_DRAWING_FILE_LIMITS: Group and insert vertices by tolerance on shared model boundary lines, moving entity vertices coinciding with modified boundary vertices. ASSIGN_MAX_Z_NODE_VERTICES: Find all vertices reaching a node and set their Z to the maximum Z. ASSIGN_MAX_Z_NODE_VERTICES_TOL: Find all vertices reaching a node and set their Z to the maximum if they differ from it by less than the tolerance. COMPARE_Z_DTM: Compare entity vertex Z with the loaded digital terrain model Z, adding entities exceeding a difference tolerance to the Tasks pane. UNGROUP_ENTITIES: Ungroup entities with more than one code into multiple entities with a single code each. DETECT_LOOPS: Detect loops (self-intersections) in Line and Polygon entities. DETECT_LOOPS_VISIBLE_LINES: Detect loops in visible lines. DETECT_LINE_CROSSING: Create an error task for each detected line intersection, by code. DETECT_VISIBLE_LINES_CROSSING: Create an error task for each detected intersection of visible lines. DETECT_LINE_CROSSING_Z: Detect line crossings and flag those whose Z difference exceeds a tolerance. DETECT_DUPLICATES_ENTITIES: Detect duplicate entities by code. DETECT_DUPLICATE_VISIBLE_ENTITIES: Detect all visible duplicate entities. DETECT_BBDD_ATTRIBUTE_ERRORS_CASES: Detect lines and polygons in two different drawing files with geometric continuity but differing database attributes. DETECT_LINE_CONTINUITY_ERRORS_CASES: Detect continuity errors where lines end at the boundary between two models without continuing into the next. DETECT_INTERSECTION_DIRECTION: Detect lines and polygons meeting at a node with incompatible digitizing directions. DETECT_NO_CONNECTED_LINES: Create an error task for each line endpoint not connected by code to another entity. DETECT_NO_CONNECTED_LINES_3D: Create an error task for each line endpoint not connected by code in 3D. DETECT_NO_CONNECTED_VISIBLE_LINES: Create an error task for each unconnected end of a visible line. DETECT_NO_CONNECTED_VISIBLE_LINES_3D: Create an error task for each end of a visible line that is not connected in 3D. DETECT_SHORT_SEGMENTS: Detect lines and polygons with segments shorter than the specified value. DETECT_ZIGZAG: Analyze lines for zigzags at their vertices. DELETE_CODES_DUPLICATE_VISIBLE_ENTITIES: Remove common codes from all visible duplicate entities. DELETE_DUPLICATE_ENTITIES: Remove duplicate entities by code, retaining only the one whose code appears earlier in the command line. DELETE_DUPLICATE_VISIBLE_ENTITIES: Delete visible duplicate entities, retaining only the one with a code appearing earlier in the code table. REMOVE_DUPLICATE_POINTS: Remove duplicate points from active drawing file entities. REMOVE_SHORT_SEGMENTS: Automatically remove geometry vertices to avoid segments shorter than a specified value. DELETE_ALL_DUPLICATE_ENTITIES: Delete all duplicate entities, by code. DELETE_ALL_DUPLICATE_VISIBLE_ENTITIES: Delete all visible duplicate entities. INSERT_VERTEX_INTERSECTION_LINE_POINT: Insert a vertex at intersections of lines with points. INSERT_VERTEX_LINES_INTERSECCION: Insert a vertex at intersections of lines with the codes supplied as parameters. INSERT_VERTEX_INTERSECTION_VISIBLE_LINES: Insert a vertex at intersections of lines visible in the orthogonal view. JOIN_NEARBY_VERTICES: Join nearby vertices within a tolerance. SPIT_LINES: Split lines at their intersections, by code. SPLIT_VISIBLES_LINES: Split visible entities at their intersections. JOIN_LINES: Join visible lines sharing any specified code. JOIN_LINES_TABLE: Join lines on screen by code when they have the same code and geometric continuity, provided no more than two entities with that code meet at the node. JOIN_VISIBLE_LINES: Join visible lines that have the same code and geometric continuity. JOIN_VISIBLE_LINE_TABLE: Join visible lines with the same code and geometric continuity, provided no more than two entities with that code meet at the node. JOIN_XYZ: Join lines bearing codes specified as parameters when they have the same Z at the joining node. JOIN_XYZ_TABLE: Join lines bearing codes specified as parameters when they have the same Z at the joining node and only two entities meet there.
Quality control
QUALITY_CONTROL_COD: Perform quality control analysis by code. QUALITY_CONTROL_VISIBLE_ENTITIES: Run quality checks on visible entities. QUALITY_CONTROL_SELECTION: Run quality checks on selected entities.
Flooding
ADD_ACTIVE_CODES_AND_CENTROID: Add active codes to entities forming the boundary of selected enclosures in the temporary topology, optionally inserting a centroid. SEARCH_CENTROID_F: Find the centroid of the topological polygon being worked on, by flooding. UNLOAD_FLOOD_TOPOLOGY: Remove the flooding topology from memory. DRAW_E_F: Draw topological enclosures by flooding. EDIT_CODES_E: Edit codes of entities forming the selected topological enclosure. GENERATE_FLOOD_TOPOLOGY: Generate a topology for subsequent flooding commands. GENERATE_FLOOD_TOPOLOGY_WITHOUT_ISLANDS: Generate a topology for subsequent flooding commands. SHOW_COD_F: Display all codes of the segments forming a topological enclosure by flooding. PUT_ATR_E: Add the active codes to entities forming the boundaries of enclosures selected in the temporary topology.
Topology
ADD_CODES_TOPOLOGY_POLYGON_BORDERS: Add active codes to polygon boundary lines with a specified centroid in a specified topology. ASSIGN_CENTROID_Z: Assign the centroid Z coordinate to the lines forming each polygon in the specified topologies. BINTOP: Calculate the active drawing file topology and find polygon and centroid formation errors. BINTRAM: Automate drawing file editing. DELETE_COD_E: Delete a code (attribute) from entities forming the boundaries of selected enclosures in the temporary topology. DELETE_ENCLOSURE: Delete codes by topological enclosure. SEARCH_CENTROID: Locate the centroid inside an enclosure after loading one or more topologies. CHNG_COD_E: Change codes by topological enclosure. CHANGE_CODE_LINES_INSIDE_TOPOLOGY_POLYGONS: Change codes of line portions inside topology polygons. TOPOLOGICAL_CONTROL_CASES: Detect neighboring polygons with different centroids across drawing files. COPY_CENTROID_F: Copy an enclosure centroid from the temporary topology into other enclosures without centroids. CREATE_CENTROIDS: Create centroids for polygons in loaded topologies. CREATE_TOPOLOGIES_VISIBLE_CODES: Create topologies from codes visible in the drawing window. LEAVE_TOP: Unload a currently loaded topology file generated with BINTOP. DETECT_POLYGONS_WITHOUT_CENTROID_LOADED_TOPOLOGIES: Flag polygons without centroids when forming a topology from all enclosures of loaded topologies. DETECT_POLYGONS_ONE_TOPOLOGY_INSIDE_POLYGONS_OTHER_TOPOLOGY: Flag topology polygons inside polygons of any selected topology. DETECT_NEIGHBOR_POLYGONS_SAME_CENTROID: Flag adjacent polygons with the same centroid. DETECT_ENCLOSURES_WITHOUT_NEIGHBORS: Analyze enclosures in all loaded topologies and flag segments belonging to only one enclosure, excluding those with any specified boundary code. DETECT_OVERLAPS_ALL_LOADED_TOPOLOGIES: Flag overlaps between polygons of all loaded topologies. DETECT_TOPOLOGY_OVERLAPS: Flag overlaps between one topology and topologies selected from the loaded topology list. DRAW_E: Draw topological enclosures from a loaded topology. REMOVE_3D_POLYGON_WALLS: Analyze polygons created from 3D topologies and remove walls exceeding a specified height. ERR: Display errors found by BINTRAM in the file loaded as a reference. ERR-: Go back to the preceding BINTRAM error. ERR+: Advance to the next BINTRAM error. EXPORT_TOPOLOGY: Export selected loaded topologies to a file as polygons. GENERALIZE_TOPOLOGY: Remove centroids and lines to merge adjacent polygons sharing a centroid in the topology supplied as a parameter. PUT_COD_ENCLOSURE_CENTROID: Add the enclosure code to entities forming the boundaries of selected topological enclosures and insert text with the centroid code at the enclosure centroid. RENAMCOD_E: Rename codes by topological enclosure. TOPOLOGY_FROM_POLYGON: Generate polygons from the topology specified as a parameter. SEE_TOPOLOGIES: Show or hide a topology and change its drawing order.
Database
ADD_ACTIVE_ATTRIBUTE: Add an attribute to the Active attributes pane. ASSIGN_ATTRIBUTE: Assign a value to an attribute in the active attribute list in the database dockable pane. ASSIGN_FIELD_VALUE_BBDD_ENTITY: Assign a new database field value for an entity. ASSIGN_ANGLE_ATTRIBUTE: Digitize two points and assign the trigonometric angle of the second relative to the first to the database field supplied as a parameter. ASSIGN_AZIMUTH_ATTRIBUTE: Digitize two points and assign their azimuth to the database field supplied as a parameter. ASSIGN_DISTANCE_ATTRIBUTE: Digitize two points and assign their distance to the database field supplied as a parameter. BORRA_ATR: Remove database links from all entities in the drawing window. CHANGE_DDBB_VALUES: Change database values associated with the drawing file. COPY_BBDD_ENTITY_ATTRIBUTE_TO_ENTITY: Copy a database field value from one entity to a field of another entity. CREATE_BBDD_VIEW: Create a virtual drawing file displaying database fields from a specified drawing file. DELETE_ACTIVE_ATTRIBUTES: Remove all attributes from the Active attributes pane. RESET_BBDD_ATTRIBUTES: Set the code table's database attributes for a code as the active attributes. SELECT_BBDD_EDITOR: Select drawing entities linked to the records selected in a database editor. SELECT_GEOMETRY_BBDD_PANEL: Select the corresponding entity in database editor panes for the selected drawing entity. SELECT_BY_ATTRIBUTE: Send a selection by database attributes to the active command. SQL: Run the SQL queries in the file passed as a parameter.
Windows, tasks, and results
DELETE_OUTPUT_BAR: Clear the contents of the output bar. DELETE_TASKS: Delete the tasks currently displayed in the tasks window. LOAD_LAYOUT: Load a previously saved window and display layout in DigiNG. LOAD_TASKS: Load a task file previously generated with SAVE_TASKS into the Tasks window. LOAD_TASKS_FILE_FORMAT: Load a text file in any format containing point coordinates. CREA_TAREAS_CON_AREAS_INFERIOR_A_VALOR: Add a task to the Tasks pane for each polygon or line closed in plan whose absolute area is below the specified value. SAVES_LAYOUT: Save the window and display layout of the DigiNG drawing file. SAVE_RESULTS: Save the contents of the results panel to a TXT file. SAVE_TASKS: Save the tasks in the Tasks pane to an XML file. LOCATE_TASK: Digitize a point and locate and select the task there, if any. MENU: Launch a numbered Digi3D user menu. TAREA-: Move to the coordinates of each task currently displayed in the tasks window, in descending order. TAREA+: Move to the coordinates of each task currently displayed in the tasks window, in ascending order.
Configuration, devices, and variables
DIGI3D: Link the DigiNG cursor to Digi3D movements. INPUT_DEVICE: Set the drawing window input device (for example, a GPS), disabling the mouse. LIMIT_0: Deactivate a working area defined by LMIT_1. LMIT_1: Set a working area bounded by the geometry of a line. N: Activate the ASCII file specified on the DigiNG startup screen or with P_FILE as the input device. SAVE: Set the interval, in minutes, between automatic backups of the active drawing file.
Programming and macros
LOAD_ASSEMBLY: Load the assembly passed as a parameter. RUN_COMMAND_PASSING_LAST_GEOMETRY: Allow macroinstructions and key command assignments to run a command that waits for a geometry selection. ORDEN_ATOMICA: Run the commands passed as parameters as atomic commands. PROGRAM: Run an external application or open a file with its associated application. PROHIBIT_COMMAND: Prevent the command specified as a parameter from running. PYTHON: Run a Python script, optionally passing arguments to it.
Help
HELP: Open Digi3D.AI help. SHOW_HELP: Display an HTML document in the application help panel.