DRAW_DISTANCE

Insert text with the plan distance (in two dimensions, 2D) between two digitized points.

Parameters

Does not accept parameters.

Notes

Digitize the first point. A temporary line appears between it and the cursor. Digitize the second point to calculate their distance, insert text with that distance, and end.

Place text at the midpoint between the two points, rotated along the line joining them, with height TH, justification JT, and decimal places NDEC.

Calculate the distance in plan (X, Y coordinates), ignoring elevation differences, with the drawing's geographic calculator, as with MEASURE_SEGMENT: with a geographic reference system, the distance is expressed in working units rather than degrees. For spatial distance (including Z), use DRAW_DISTANCE_3D; for height difference alone, use DRAW_HEIGHT.

Command characteristics

Command type Interactive command
Repeats automatically Yes
Menu option Draw/Define height/2D distance
Toolbar Elevations
Extension DigiNG.OrdenesStandard.dll
Implementation Native
Related variables TH — text height
JT — text justification
REPEAT — repeat the last command executed
Related commands AREA
DRAW_HEIGHT
DRAW_DISTANCE_3D
DRAW_PERIMETER
DRAW_PERIMETER_3D
MEASURE_SEGMENT
PUT_DISTANCE
Internal name {13136F31-77CB-4603-8755-359C8BD03A1C}