Edit

General application information

Digi3D.AI evolved from two programs that began as independent products and eventually merged into a single application.

Digi was created in 1988 as a CAD (computer-aided design) application without a graphical interface, capable of recording coordinates from a Topodata R2's encoders. After capture, the coordinates were converted to HP-GL2, the format used by the plotters of the time to print the photogrammetric compilation.

Over time, Digi became a graphical application, first for MS-DOS and then for Windows, and was renamed Digi21.

Digi3D was created to replace the analog/analytical stereoplotters of the time. The idea was to replace the machine (analog or analytical) connected through an encoder box to another computer running Digi21.

The first versions of Digi3D did not support vector superimposition and worked only with frame camera stereo models.

The stereoscopic viewing system used was a monitor stereoscope.

This initial version of Digi3D could only load images (scanned with a photogrammetric scanner) and perform their internal, relative and absolute orientations.

Once those orientations were complete, Digi3D let the operator view the model as if using an analytical stereoplotter. Whenever the operator moved the model, Digi3D sent coordinates through a serial cable to another computer running Digi21.

For a time, Digi3D and Digi21 were used together: operators had two computers, one running Digi3D for stereoscopic viewing and another running Digi21 for geometry capture.

Eventually, Digi3D and Digi21 merged into a single application called Digi3D.

There have been several versions: Digi3D 2000, Digi3D 2002, Digi3D 2005, Digi3D 2007 and, finally, Digi3D.AI. This manual retains the distinction between the two original programs: it calls the photogrammetric window Digi3D and the drawing window DigiNG (NG refers to the internal name Digi Nueva Generación, or New Generation).

Digi3D

Digi3D loads monoscopic, stereoscopic and multiple-viewpoint models from various sources: Internet data services such as Web Map Service and Web Map Tile Service, frame cameras, pushbroom sensors such as Leica ADS40/80, satellite images, orthophotos, stereo orthophotos (generated from an orthophoto and a digital surface model and/or digital terrain model), dense point clouds, etc.

Digi3D connects to many 3D devices, including handwheels, topo-mouse, soft-mouse, Stealth3DMouse, standard mice and multiple simultaneous mice.

Digi3D supports stereoscopic viewing systems such as anaglyph, professional page-flipping stereo, Planar 3D, passive glasses, autostereoscopic monitors and stereoscopes.

It loads multiple image formats, including BigTIFF, GeoTIFF, JPG, JPG2000, ECW, MrSID and NTv2.

DigiNG

DigiNG is the application for capturing and editing mapping information.

DigiNG provides more than 300 commands designed for photogrammetric compilation and map editing. They digitize lines, points, text, polygons and complex entities, and add metadata in databases.

DigiNG has a snapping system (searching for entities or points on entities) in which you can configure an automated, code-based search mode plan.

It supports intelligent entity searches using numerous criteria.

It performs geometric and topological analyses.

It creates orthophotos.

It works with numerous graphic formats (binary, double-precision binary, AutoCAD *.dwg, MicroStation v8 *.dgn, ESRI Shapefiles *.shp, Geomedia Access Datawarehouse *.mdb, PostGis, etc.) without importing and/or exporting.