DIGI3D_MOUSE

Captures and releases the Windows mouse in the photogrammetric window.

Parameters

Parameter number Description Values Optional
1 Automatic mode With no parameter, toggles the Boolean variable on or off.
0: disables the Boolean variable.
1: enables the Boolean variable.
?: queries its value. A balloon indicates whether the command is enabled or disabled.
Yes

Notes

Regardless of the selected input device (topo-mouse, handwheels, etc.), you can always use any mouse connected to the system as an input device in the photogrammetric window.

When the photogrammetric window captures the mouse, it hides the pointer until the mouse is released. Mouse movements become movements of the images displayed in the photogrammetric window.

With no parameters, toggles mouse capture: releases a captured mouse or captures a released mouse.

DIGI3D_MOUSE cannot release mice configured for exclusive use in the photogrammetric window.

There are two ways to capture the mouse:

  1. Click in the photogrammetric window (if Click to capture mouse is enabled under Stereoscopy in Configuration).
  2. Run DIGI3D_MOUSE.

There are three ways to release the mouse:

  1. Hold Ctrl. The mouse remains released while you hold the key, so you can use menus, toolbars and other interface elements. Releasing Ctrl captures the mouse again.
  2. Run DIGI3D_MOUSE.
  3. Press Enter, then Esc. Enter opens the command entry window; Esc closes it. This sequence releases the mouse if it was captured.

Command characteristics

Command type Boolean variable
Repeats automatically No
Menu option This command has no associated menu option
Toolbar This command has no associated toolbar button
Extension Digi3D.CommonCommands.dll
Implementation Native
Related variables No related variables
Related commands No related commands
Internal name