SHOW_CONTOUR_PASS

Enable or disable contour pass display: mark the parts of configured lines whose Z is near the active Z with an animated dashed line.

Parameters

Parameter number Description Values Optional
1 Variable value If no parameter is specified, the Boolean variable toggles from Enabled to Disabled or from Disabled to Enabled.
0: Disable the Boolean variable.
1: Enable the Boolean variable.
?: Display the value of the Boolean variable in a balloon showing whether it is enabled or disabled.
Yes

Notes

Any nonzero number enables the variable. If the parameter is neither a number nor ?, the command interprets it as 0 and disables the variable.

Set the tolerance and line codes with CONFIGURE_SHOW_CONTOUR_PASS. Until configured, enabling the variable marks nothing and displays no warning.

Spans are marked only if Z is locked in the photogrammetric window, for example with FIXZ or Z. Nothing is marked without an open photogrammetric window.

Enabling or disabling the variable recalculates spans and refreshes the view. Disabling it removes the marked spans.

Spans are drawn as an animated red and white dashed line with a mark at each vertex, in the drawing and photogrammetric windows. They are not part of any drawing file or selection.

This variable is disabled each time Digi3D.AI starts.

Command characteristics

Variable type Boolean
Repeats automatically No
Menu option Immediate/Snaps/Show curve pass
Toolbar Snap
Extension DigiNG.OrdenesStandard.dll
Implementation Native
Related variables FIXZ
Related commands CONFIGURE_SHOW_CONTOUR_PASS
Internal name {9D6A4AC4-08FF-43AB-97BF-60E9D6DC7BB2}