Summit
The Summit extension reads camera calibration and exterior orientations from Summit Evolution .smtxml projects. Also opens them in Photogrammetric project.
Aerial triangulation file
In Aerial triangulation file, select Summit Evolution project files (*.smtxml). Reads only aerial .smtxml projects: /SummitProject/ProjectType must equal Aerial. Otherwise displays “The .SMTXML file is not "Aerial"”.
Finds each model image in /SummitProject/Images/ImageInfo using the ImageFile name without folder or extension, ignoring case. If absent, displays “Unable to find information for the photo: image”.
Does not read Summit Evolution .camera files: reads the camera from .smtxml.
The extension does not provide absolute orientation.
Exterior orientations
From each image's ImageInfo, reads:
Exterior/ProjectionCenter: projection center X, Y and Z.Exterior/Angles: omega, phi and kappa rotations. Builds the matrix in omega, phi, kappa order.Exterior/AngleUnits:RADIANSmeans radians; any other value means degrees.Rotation: image rotation in degrees (0, 90, 180 or 270). Applies it when loading the image and accounts for it when creating the camera.
Gets mean ground height from AveZ in /SummitProject/ProjectZ, in projection center Z units. Without AveZ, assigns 0 in those units.
Camera
The file contains calibration. Without a model camera file, reads it from the aerial triangulation file (see Camera):
- The image's
AssignedCameraidentifies its position in/SummitProject/CameraList(0 is first). - Reads text from
/SummitProject/InternalCameras/IntCamwhoseKeymatches that camera name. One key per line:FOCAL_LENGTH:,PRINCIPAL_POINT:,FILM_WIDTH:,FILM_HEIGHT:,IS_DIGITAL:,CAM_DIGITAL_CAM_ROTATION:andCALIBRATION_TYPE:. - Calculates pixel size using
FILM_WIDTH:,FILM_HEIGHT:and imageDimensions.
Supports only digital cameras (nonzero IS_DIGITAL:) without CALIBRATION_TYPE:. Analog cameras or distortion calibrations (radial, table or 7-parameter formula) produce a message beginning “Summit Evolution cameras with… are not implemented yet”.
Coordinate reference system
Reads the .prj with the .smtxml file's name (proyecto.prj for proyecto.smtxml). Without .prj, displays Would you like to assign one?. Does not ask for the vertical system.
Photogrammetric project
Opening .smtxml in Photogrammetric project creates one model per /SummitProject/Models/ModelInfo, using ModelName, ModelLeft and ModelRight. All models form one strip. Nonaerial projects do not open in the pane.
Error messages
- “Error when loading file: file. Line: n, column: n”: malformed XML.
- “Unable to create camera because the variable: key was not located”: missing
FOCAL_LENGTH:,PRINCIPAL_POINT:,IS_DIGITAL:,FILM_WIDTH:orFILM_HEIGHT:. - “The value of the variable "CAM_DIGITAL_CAM_ROTATION" does not belong to the group {0,1,2,3}”: invalid camera rotation.
- “The node node has n values and 3 were expected in the file: file”: an image's
Exterior/ProjectionCenterorExterior/Angleshas fewer than three values. - “Unknown error when loading file: file”: a read error, such as a missing required node.