DVP

The DVP extension reads camera calibration and exterior orientation from DVP .par photo orientation files. Each image has a .par with the same name and folder (107.par for 107.tif).

.par files

Does not use Aerial triangulation file for orientations: when loading a model, searches for both images' .par files. If both .par files exist, reads exterior orientations from them, even if the model has no aerial triangulation file. The file selection type is DVP's photo orientation files (*.par).

Reads these keys, case-insensitively, with their values on the same line:

Key Values
$FOC00 Focal length.
$XYZ00 Projection center X, Y and Z.
$OPK00 Omega, phi and kappa rotations in degrees. Builds the rotation matrix in omega, phi, kappa order.
$PARAFFINE00 Six coefficients of the affine transformation from pixels to plate coordinates.

Other lines are ignored. Example:

$FOC00 153.000
$XYZ00 445210.123 4485012.456 2345.678
$OPK00 0.1234 -0.5678 90.1234
$PARAFFINE00 0.021 0.000 -115.000 0.000 -0.021 115.000

The extension does not provide absolute orientation.

Camera

The .par contains camera calibration: focal length from $FOC00 and affine transformation from $PARAFFINE00. The principal point is (0, 0); there is no distortion correction.

Reads the camera from a .par corresponding, in order, to the model's camera file, its aerial triangulation file if it has no camera file, or the image if it has neither (see Camera).

Coordinate reference system

Reads the .prj with the left image's name and folder (107.prj for 107.tif). Without .prj, displays Would you like to assign one?, which creates .prj beside the left image. Does not ask for the vertical system.

Error messages

  • “The following error was located when opening the file file: error”: cannot open a .par.
  • “Unable to find the variable: key in the file: file”: missing $FOC00, $XYZ00, $OPK00 or $PARAFFINE00.