Roads Generate

Roads tab

This group contains Roads module tools generating new documents:

  • Project alignment: projects an alignment onto a DTM to obtain the terrain profile, useful as an elevation reference when starting a road's vertical design. Load a DTM with Load first. The command switches to horizontal alignment view for left-button selection, then automatically displays the resulting profile and data band in vertical alignment view. Available only with a loaded DTM.
  • Profile: generates an alignment's longitudinal profile. The program automatically switches to horizontal alignment view for selection, then opens a profile configuration dialog.
  • Cross sections: calculates an alignment's cross profiles in a new drawing document. The program switches to horizontal alignment view for selection, then opens their configuration dialog. Available only with a loaded DTM.
  • DTM with road: after designing horizontal and vertical alignments and assigning templates, calculates terrain modified by the new roads on an existing DTM. Load a DTM with Load first. A dialog selects horizontal and vertical alignments to use. Available only with a loaded DTM.
  • Volume of layers: calculates material volumes for layers defined in a road's assigned templates. Select the alignment, then configure the dialog.
  • Mass diagram: calculates a longitudinal profile showing total road earthwork by chainage.
  • Sequential points: extracts sequential alignment points for later setting out. Select the alignment, then configure the dialog.