Creating a photogrammetric project for Bronchales

Create photogrammetric project lets you create both photogrammetric project files and .d3d project files.

In this example, you will create a photogrammetric project file specifying a single strip containing two models: 107-108 and 108-109.

Complete Measuring the second absolute orientation before continuing.

  1. Display the Photogrammetric project pane by selecting Window/Other windows/Photogrammetric project.
  2. Click the first button on the Photogrammetric project pane toolbar. Create photogrammetric project appears.
  3. Click the ellipsis button to specify the file name to create. Open appears.
  4. Locate the Bronchales project folder and enter a file name, for example Proyecto de Bronchales. Click Open.
  5. Select Conical (Stereoscopic) in Sensor. It is selected by default.
  6. Click Create under Strips. Strip properties appears. The strip's default name is Strip: 1. Click OK. Check that the new strip's name appears in Strips.
  7. With Strip: 1 selected in Strips, click Load under Models. This adds .d3d project files to Models. Open appears.
  8. Locate and select 107-108.d3d and click Open. Model 107-108 appears in Models.
  9. Click Load again and load 108-109.d3d.
  10. Click OK. Create photogrammetric project closes, and the project loads in Photogrammetric project.
  11. Check that Photogrammetric project contains a section named Strip: 1. Expand it to see the two models, 107-108 and 108-109.
  12. Click model 107-108. A photogrammetric window opens with model 107-108.
  13. Click model 108-109. The model displayed in the photogrammetric window changes.

Video