AUTOMATIC_HEIGHT_LABEL

If the active sensor supports it, project a line downward and upward and dimension its intersection with the model.

Parameters

Does not accept parameters.

Notes

An open photogrammetric window with a supporting sensor (the point cloud sensor) is required. If no photogrammetric window is open or the active sensor does not support this command, display an error message and end.

As the cursor moves, find the nearest model point below and above it and preview the dimension. Enter a point to add these to the drawing file:

  • A line between the lower and upper points.
  • Text at the line midpoint with their Z difference, using the drawing window's decimal places and active text height and text justification.

Command characteristics

Command type Interactive command
Repeats automatically Yes
Menu option This command has no associated menu option
Toolbar This command has no associated toolbar button
Extension DigiNG.OrdenesStandard.dll
Implementation Native
Related variables TH — text height
JT — text justification
REPEAT — repeat the last command executed
Related commands DRAW_HEIGHT
Internal name {8F359476-FD67-4C4D-8509-24E0C230F661}