Measuring aerotriangulation for model 107-108

In this example, you will aerial triangulate models 107-108 and 108-109. Since the project has a single strip, measure at least 5 points per photo: 1070, 1071, 1072, 1073, 1074, 1080, 1081, 1082, 1083, 1084, 1090, 1091, 1092, 1093, 1094.

Measure these points in every model where they appear.

Complete Measuring internal and relative orientations automatically before continuing.

  1. If you followed every step of this tutorial, your project directory may contain two subfolders: Aerotriangulación and Instantáneas. If so, delete them.

  2. Delete any absolute orientation files (files with the .abs.xml extension).

  3. Display the Photogrammetric project pane by selecting Window/Other windows/Photogrammetric project.

  4. Click the second toolbar button in the automatic model switching pane. Open appears.

  5. Select Proyecto de Bronchales.d3dprj and click Open.

  6. Expand Strip: 1 in the Photogrammetric project pane.

  7. Select 107-108. A photogrammetric window opens with model 107-108.

  8. Click T on the photogrammetric window toolbar. The Aerotriangulation measurement pane appears.

  9. Check that this is the same pane as for absolute orientation (with a Schema drop-down list added).

  10. Select One strip with percentages.

  11. Check that the program asks you to digitize point 1070 and has moved the photogrammetric window to the center of photo 107. Choose where to measure point 1070 and press any input device button.

  12. Digitize point 1071 as requested. The photogrammetric window has moved to the top of photo 107.

  13. Measure every point requested by the program.

  14. Click Cancel to close Enter a terrain point of the point file, which appears after all points have been measured, as in absolute orientation.

  15. Click the ellipsis button in Point file in Aerotriangulation measurement. Control point file appears.

  16. Click the ellipsis button to change the control point file. Open appears.

  17. Locate Puntos de apoyo de Bronchales para aerotriangular.xyz and click Open. This reduced control point file contains only 4 control points.

  18. If the associated coordinate reference system is not WGS 84 / UTM Zone 30N + Alicante height, select it.

  19. Click OK.

  20. Click Add in Aerotriangulation measurement to measure points 7 and 6. Enter a terrain point of the point file appears.

  21. Select and measure point 7 (remember its location).

  22. Select point 6 in Enter a terrain point of the point file, which appears again, and measure it.

  23. Enter a terrain point of the point file appears again.

    There are no more control points in this model, and you have measured every point contributed by both photos, but you can add more if you want.

    Enter 1075 and click OK.

  24. Check that the program asks you to digitize 1075. Absolute orientation requires a point that exists in the control point file; aerotriangulation measurement lets you add points while measuring.

  25. Measure 1075 at your chosen location.

  26. Click Cancel when Enter a terrain point of the point file appears again, because you will not measure any more points.

  27. Click OK in Aerotriangulation measurement.

Video