Project onto a DTM
To run this tool from the command line, enter:
MDTopX [archivo de entrada] /PRO [archivo de salida]
The input file must be the digital model onto which the file will be projected.
The output file specifies where to save the projection. Its extension determines the format: BIN (DIGI), DXF (AutoCad) or DGN (MicroStation).
To configure projection, MDTop.INI must also contain the mandatory [Proyecta] line followed by:
- Entrada: drawing file to project onto the digital model.
- CodError: error marker code.
- ComprobarCota: 0 (do not check) or 1 (check the difference between original and projected elevations).
- ComprobarFuera: 0 (do not check) or 1 (check whether any entity exceeds the digital model boundaries).
- SizeErrores: error marker size in meters.
- Errores: error marker file name.
- Tolerancia: tolerance in meters for marking an error.
- Tipo_Cortes: 0 (do not use triangle intersections), 1 (use only breakline intersections) or 2 (use all triangle intersections).
- Tipo_Interpola: 0 (interpolate point elevations using intersections) or 1 (project individually).
[Proyecta]
Entrada = linea.bin
CodError = ERR
ComprobarCota = 1
ComprobarFuera = 1
SizeErrores = 2.5
Errores = ERR.bin
Tolerancia = 1
Tipo_Cortes = 2
Tipo_Interpola = 1
Field names are case-insensitive.
See also: