DETECT_LINE_CROSSING_Z

Detect line crossings and mark crossings where the lines' Z difference exceeds a tolerance as errors.

Parameters

Parameter number Description Optional
1 Code or codes (one or more, separated by spaces) Yes

Detect crossings between lines if Z-tolerance is exceeded dialog box

Detect crossings between lines if Z-tolerance is exceeded dialog box, with the Tolerance field

Specify the tolerance in this dialog box.

  • Tolerance: maximum accepted difference between the two lines' Z values at the crossing, in reference system units. Default: 1.0.
  • OK: search for crossings using that tolerance.
  • Cancel: end without searching. Leaving the field empty and clicking OK has the same effect.

Notes

At each crossing where the lines' Z difference, interpolated at the crossing, exceeds the tolerance, create two error tasks in the Tasks pane, one per line. Tasks have the same text as DETECT_LINE_CROSSING: "An intersection between lines has been located". Self-intersections are also detected.

Analyze visible lines and polygons (including holes) within the area of interest bearing any specified code. Codes support * and ? wildcards. To include all codes bearing a tag, prefix its name with a number sign (#).

Without codes, wait for a multiple selection, analyze the selected entities, and end.

If the Tasks pane's Empty automatically option is enabled, empty the pane when the tolerance is accepted. This option is enabled by default.

Use a decimal point for the tolerance: a comma causes the decimal part to be ignored (1,5 is read as 1).

  • Geometric analysis/Detect crossings between lines if Z-tolerance is exceeded/Visible lines: run with parameter * to analyze all visible lines.
  • Below it, the submenu lists one option per code table tag. Each analyzes lines bearing codes with that tag.

Command characteristics

Command type Interactive command
Repeats automatically No
Menu option Geometric analysis/Detect crossings between lines if Z-tolerance is exceeded/Visible lines
Toolbar This command has no associated toolbar button
Extension DigiNG.OrdenesTopologia.dll
Implementation Native
Related variables No related variables
Related commands DETECT_LINE_CROSSING
DETECT_VISIBLE_LINES_CROSSING
Internal name