Example 8: Classify a LiDAR file
Objective
Classify points captured with LiDAR.
Input file
- instituto.las: LAS file containing measured points.
Procedure
- Load instituto.las using Open from the MDTopX button, selecting LAS files.
- Run Higher on the LIDAR ribbon. Set maximum point spacing to 3 meters and minimum height to 3 meters. Select vegetation as the classification type. Do not classify by surfaces.
- The program classifies every detected high point as vegetation.
- Run Flat surfaces. Select vegetation from the list. Set the minimum area to 100 m² and maximum slope to 30º.
- The program reclassifies points detected as flat surfaces as buildings.
Output files
- Classified LiDAR file.