Drawing points, patterns and drawing scale
- Click the binoculars on the Code toolbar. The Select codes dialog appears, showing the codes in the table you selected when creating the drawing file:
| Column | Description |
|---|---|
| Code | Code name |
| Color | Code display color in the drawing window |
| Type | Linear Point Virtual |
| Description | Code description |
- If Digi3D.AI is in ready mode and the active code is a linear code, clicking the drawing window with the data button automatically runs LINE and draws a polyline.
- If Digi3D.AI is in ready mode and the active code is a point code, clicking the drawing window with the data button runs POINT.
Follow these steps to digitize a point:
- Make sure Digi3D.AI is in ready mode. Otherwise, press Esc or the cancel button until Digi3D.AI is in ready mode.
- Select a point code.
- Click the drawing window with the data button. Digi3D.AI inserts a point at the coordinates where you clicked.
Follow these steps to turn on the graphical representation (pattern) of the point you just drew:
- Run PATTERN to display the representation of the point's code. To run the command, click the corresponding button on the Viewing parameters toolbar.
The scale at which patterns are displayed depends on the Active scale on the Drawing file tab of the New project dialog.
Follow these steps to change the display scale of the point you just digitized:
- Close the drawing window.
- Select File/New/Open photogrammetric model or drawing file... from the menu. The New project dialog appears.
- Select the Drawing file tab.
- Change Configuration parameters/Recording/Scale to change the scale.
- Click Accept.
- Turn on pattern display by clicking the button for the Pattern command on the Viewing parameters toolbar.
- Repeat the process with different scale values to see the difference between them.
The Scale value affects only display; it does not affect entity registration.