COPY_CENTROID_F

Copy an enclosure centroid from the temporary topology into other enclosures without centroids.

Parameters

Does not accept parameters.

Notes

This flooding command acts on enclosures you click and requires a topology for flooding loaded in memory. First generate that topology with GENERATE_FLOOD_TOPOLOGY or GENERATE_FLOOD_TOPOLOGY_WITHOUT_ISLANDS, and regenerate it after modifying drawing lines. Without a topology for flooding, the command displays "No temporary topology is created", sounds the error tone, and ends, and Flooding/Copy Centroid and Topology/Copy Centroid are disabled.

  1. Press the data button inside an enclosure with a centroid and press the spacebar. The command takes that enclosure's centroid.
  2. Press the data button inside an enclosure without a centroid and press the spacebar. The command adds a copy of the centroid at the center point calculated by the topology for that enclosure.
  3. Repeat step 2 to copy the same centroid into other enclosures.
  4. Press Esc to end the command.

If the enclosure selected in step 1 has no centroid, or the enclosure selected in step 2 already has one, the command sounds the error tone.

Command characteristics

Command type Interactive command
Repeats automatically No
Menu option Flooding/Copy Centroid
Topology/Copy Centroid
Toolbar This command has no associated toolbar button
Extension DigiNG.OrdenesTopologia.dll
Implementation Native
Related variables No related variables
Related commands SEARCH_CENTROID_F
Internal name {415D4B3E-68C0-43C4-B8D8-D8EF42C288C6}