Profiles

Profiles

To run this tool from the command line, enter:

MDTopX [archivo de entrada] /PER [archivo de salida]

The input file must be the digital model onto which profiles will be projected.

The output file specifies where to save longitudinal profiles. Its extension determines the format: BIN (DIGI), DXF (AutoCad) or DGN (MicroStation).

If longitudinal profiles are enabled, they are saved with the prefix "Transversales de " followed by the output file name, in the same format. The projected corridor is saved with "Proyección de " followed by the output file name, in the same format.

If corridor volume calculation is enabled, its triangulation is saved with "Traza de " followed by the output file name, in digital model format. Its volumes are saved with "Cubicación de " followed by the output file name, also in digital model format.

To configure profile projection, MDTop.INI must also contain the mandatory [Perfiles] line followed by:

  • Traza: Drawing file containing the entities from which profiles will be calculated.
  • CodigoRasante: Code of entities forming the grade line profile.
  • CodigoTerreno: Code of entities forming the terrain profile.
  • EscalaHorizontal: Profile horizontal scale denominator.
  • EscalaVertical: Profile vertical scale denominator.
  • HayGuitarra: 0 (no data band) or 1 (data band).
  • HayRasante: 0 (no grade line profile) or 1 (grade line profile).
  • HayLongitudinal: 0 (no longitudinal profiles) or 1 (longitudinal profiles).
  • HayTransversales: 0 (no cross profiles) or 1 (cross profiles).
  • Guitarra_Alineaciones: Option disabled.
  • Guitarra_Altura: Data band text height in meters.
  • Guitarra_AlturaTitulo: Longitudinal profile title height in meters.
  • Guitarra_CotaRasante: 0 or 1.
  • Guitarra_CotaTerreno: 0 or 1.
  • Guitarra_CotaRojaDesmonte: 0 or 1.
  • Guitarra_CotaRojaTerraplen: 0 or 1.
  • Guitarra_Dist0: Distance from the origin in meters.
  • Guitarra_DistOrigen: 0 or 1.
  • Guitarra_DistParcial: 0 or 1.
  • Guitarra_Kms: Option disabled.
  • Guitarra_Perfiles: Option disabled.
  • Guitarra_TipoPlanoComp: 0 (absolute datum elevation), 1 (elevation relative to each profile) or 2 (elevation relative to all profiles).
  • Guitarra_ValorPlanoComp: Absolute or relative datum elevation in meters.
  • Guitarra_Puntos: Option disabled.
  • Guitarra_CodGuitar: Data band line codes.
  • Guitarra_CodLineasInternas: Data band internal line codes.
  • Guitarra_SoloIntervalo: 0 (information at every profile point) or 1 (information only at a specified interval).
  • Guitarra_Intervalo: Distance in meters between points where information is recorded.
  • Presenta_NumeroPerfiles: Number of longitudinal profiles per row/column.
  • Presenta_OrdenaFilas: 0 (order by rows) or 1 (order by columns).
  • Presenta_SeparaPerfilX: Horizontal spacing between profiles, in meters.
  • Presenta_SeparaPerfilY: Vertical spacing between profiles, in meters.
  • Tipo_Cortes: 0 (do not use triangle intersections), 1 (use only breakline intersections) or 2 (use all triangle intersections).
  • Tipo_Interpola: 0 (interpolate point elevations using intersections) or 1 (project individually).
  • Transversal_AnchoIzq: Width in meters to the left of the cross profile axis.
  • Transversal_AnchoDer: Width in meters to the right of the cross profile axis.
  • Transversal_CubicaTraza: 0 (do not calculate volumes) or 1 (calculate volumes).
  • Transversal_Distancia: Cross profile spacing in meters.
  • Transversal_EscalaHor: Cross profile horizontal scale denominator.
  • Transversal_EscalaVer: Cross profile vertical scale denominator.
  • Transversal_HayAscii: 0 (no ASCII file) or 1 (ASCII file).
  • Transversal_HayInforme: 0 (no report) or 1 (report).
  • Transversal_PeralteDer: Superelevation percentage to the right of the cross profile axis.
  • Transversal_PeralteIzq: Superelevation percentage to the left of the cross profile axis.
  • Transversal_TaludX: Slope offset along the horizontal axis.
  • Transversal_TaludY: Slope offset along the vertical axis.
  • Transversal_CodRasante: Code of entities forming the grade line cross profile.
  • Transversal_CodTerreno: Code of entities forming the terrain cross profile.
  • Transversal_FicAscii: Generated ASCII file name.
  • Transversal_TipoFicAscii: Cross profile ASCII output format: 0 (TopCal), 1 (Clip) or 2 (Genius).
  • Transversal_FicInforme: Generated report name.
  • Transversal_Presenta_NumeroPerfiles: Number of cross profiles per row/column.
  • Transversal_Presenta_OrdenaFilas: 0 (order by rows) or 1 (order by columns).
  • Transversal_Presenta_SeparaPerfilX: Horizontal spacing between cross profiles, in meters.
  • Transversal_Presenta_SeparaPerfilY: Vertical spacing between cross profiles, in meters.
  • Transversal_Tipo_Cortes: 0 (do not use triangle intersections), 1 (use only breakline intersections) or 2 (use all triangle intersections).
  • Transversal_Tipo_Interpola: 0 (interpolate point elevations using intersections) or 1 (project individually).
  • Transversal_Guitarra_CodGuitar: Code of cross profile data band entities.
  • Transversal_Guitarra_CodTextos: Cross profile text code.
  • Transversal_Guitarra_Altura: Cross profile data band text height in meters.
  • Transversal_Guitarra_AlturaTitulo: Cross profile title height in meters.
  • Transversal_Guitarra_PrimerPerfil: First cross profile sequence number.
  • Transversal_Guitarra_TipoPlanoComp: 0 (absolute datum elevation), 1 (elevation relative to each profile) or 2 (elevation relative to all profiles).
  • Transversal_Guitarra_ValorPlanoComp: Absolute or relative datum elevation in meters.

Field names are case-insensitive.

See also: