Conical

The Conical sensor supports photogrammetric models from metric or perspective cameras (classic aerial and terrestrial photogrammetry): interior, relative, and absolute orientation, aerial triangulation measurements, and more.

Camera calibrations and model orientations can be read from different applications and formats. See extensions.

Creating a model

Create Conical models with Create model, selecting Conical (Stereoscopic) in Fast model change project file. The proposed model name combines the left image name, a hyphen, and the right image name without extensions: 107.tif and 108.tif propose 107-108 and create 107-108.d3d in the working directory. You can type another name in .d3d file name. A model opened from a .d3d file takes that file's name without extension, also if you renamed the file. See Model name.

Sensor properties

  • Aerial triangulation file: source of both images exterior orientations and camera calibration if included. Supports enabled extension formats. Leave empty for work without aerial triangulation.
  • Left image and Right image: model image files.

Orientation sources

Loading reads files from the model working directory. <izquierda> and <derecha> stand for image names without extensions.

Camera

  1. With Aerial triangulation file and no camera file, search aerial triangulation for calibration.
  2. If unavailable, use the model camera file.
  3. Without either, open Camera file for the left image (or Camera file for the right image) to select one. Canceling prevents model loading.

Use Camera file editor to create or edit camera files or convert a camera from another format or project to Digi3D .cam.

Relative orientation

  • With Aerial triangulation file: extensions attempt to read it. A successful extension supplies exterior orientations. Working directory <izquierda>-<derecha>.rel.xml, <izquierda>-<derecha>.rel, and <imagen>.orientation.xml are used only if no extension reads aerial triangulation.
  • Without Aerial triangulation file: load, in order, <izquierda>-<derecha>.rel.xml, <izquierda>-<derecha>.rel, or the pair <izquierda>.orientation.xml and <derecha>.orientation.xml. With paired .orientation.xml files, relative orientation cannot be edited.
  • If none is found, create a provisional relative orientation in an unknown coordinate reference system, measurable with RELATIVE_ORI.

With Aerial triangulation file, Results may show:

  • "No camera extension could read the aerial triangulation file file: the model has been loaded without the exterior orientations of that file.": no enabled extension recognizes the file format or extension.
  • "The relative orientation file file .rel.xml is ignored because the model loads its exterior orientations from the aerial triangulation file file. To use the relative orientation, remove the aerial triangulation file from the model.": a <izquierda>-<derecha>.rel.xml exists, for example from measurements before the aerial triangulation file was specified.

Absolute orientation

Read absolute orientation from aerial triangulation if its extension provides it. Otherwise, read <izquierda>-<derecha>.abs.xml (or legacy <izquierda>-<derecha>.abs2). ABSOLUTE_ORI writes absolute orientation to <izquierda>-<derecha>.abs.xml even if the model's .d3d file has another name. Without absolute orientation from either source, there is no absolute transformation: model coordinates are relative orientation coordinates.

Coordinate reference system

If aerial triangulation does not specify a coordinate reference system, or specifies one without a vertical component, loading requests it. See Model without a coordinate reference system.