PhotoScan
The Conical sensor obtains camera calibrations and photogrammetric model orientations from PhotoScan files.
Coordinate reference system
PhotoScan's camera XML specifies the coordinate reference system in the chunk's <reference> node. If absent, set to a local system (Local Coordinates in PhotoScan), or unrecognized by Digi3D.AI, reads the .prj with the XML's name (orientaciones.prj for orientaciones.xml). Without .prj, displays Would you like to assign one?.
If <reference> specifies an unrecognized system, the chunk is georeferenced: Digi3D.AI transforms its coordinates to the .prj system or the system selected in the dialog, as with a recognized system.
Without <reference> or with a local system, model coordinates result from applying the chunk's <transform> to PhotoScan's internal coordinates, without transformation between reference systems. The selected system only identifies those coordinates, so it must match the PhotoScan project's reference coordinates (control points or camera positions).
Metashape components
Metashape 2 splits a chunk into components when orientation cannot connect all photos. Each component has its own <transform>, and each photo identifies its component. Digi3D.AI applies each photo's component transformation, placing photos from all components in the same coordinate reference system.
Photos from different components cannot form a model because Metashape did not orient them together:
- Selecting left and right photos from different components produces an error and does not load the model.
- When automatically creating each strip's models, Digi3D.AI skips models between consecutive photos belonging to different components.