DTM view
This group contains DTM view management commands:
- Surface: selects how to display the DTM. Requires a digital model document or digital models loaded as references.
- DTM Objects: shows or hides objects loaded over the digital model. Load them with Add objects in TIN edition DTM Objects.
- Surface Types: shows or hides model triangles assigned a surface type.
- Base: displays a surface at the model's minimum elevation with the same plan boundary, joined vertically to the outer model cells or triangles to strengthen the three-dimensional appearance.
- Breaklines: shows or hides retained model breaklines. Requires a digital model document or digital models loaded as references.
- Contours: displays quick contours for elevation analysis. These consist only of line segments formed by intersections between triangles and elevation planes. If active, contour lines are hidden; if inactive, a dialog configures their display. Requires a digital model document or digital models loaded as references.
- Smoothing points: for a smoothed grid digital model, selects how many points display each cell, representing its surface more accurately.
- Light: enables or disables the light source that gives the model view relief. Sometimes you do not want different model element colors depending on lighting. Change lighting with Light on the Home tab.